A gas stove is a basic apparatus in every household as it helps make regular cooking chores more comfortable. But like any other built-in hardware, gas stoves can experience some problems after a few years of use. Knowledge of these concerns is highly valuable since it will help address trivial troubles before exacerbating them into serious ones. In this article, you will be taken through 10 issues that may arise with this appliance and how to fix them to minimise disruption in your kitchen.
The Burner Won’t Light
Some of the most common issues that you will experience with a gas stove include the case where the burner fails to ignite. This issue is normally a result of blocked burner ports or something else preventing the free flow of gas. To correct this, use a brush or stick a pin in the burner to remove whatever is blocking the movement. If the boiler is still not working, the problem may have to do with the igniter and replacing this part is in order.
Weak Flame
Another usual problem with gas stoves is that the flame needs to be stronger. This normally occurs as a result of low gas pressure or dirty burners in the aerogel. Ensure that the gas valve is opened to its maximum and clean the ports of the burner to allow passage of gas. However, if it continues, consult a professional technician to inspect the stove for you.
Gas Odour When the Stove is not in use
This is a problem that should be addressed when one is getting a smell of gas while the stove is off. A rather hazardous gas leakage might also cause this. Whenever you suspect there is a gas leak, they include blowing out the fire on the stove, opening the windows, and calling a technician to check and fix the problem.
A clicking sound without ignition is common but can also be caused by a faulty electronic control module
If there is a steady clicking noise but the burner does not light up, the problem may well be with the igniter: it is either worn out or clogged. Water accumulation may also lead to the situation when the igniter clicks but does not ignite the stove. First, you can try to dry the surrounding area of the igniter more. If this doesn’t solve the problem, then you should clean the igniter or even buy a new one.
Uneven Flame Distribution
Poor flame distribution makes cooking with the cookers quite a challenging undertaking. This is because when the burner is dirty or misaligned, the flame is irregular and will not burn steadily with pure blue colour. Misalignment of the burner and buildup of debris can cause this issue, but both can be solved by cleaning and aligning it properly. In case the problem continues, then the gas regulator may require some fixing.
The Burner is Too Noisy
A noisy burner often indicates that there’s an improper air-to-gas ratio. This problem can be taken care of by acting on the air shutter on the burner. In case the noise persists, seek further advice from an expert to determine the problem.
The Burner Won’t Stay Lit
In the cases when the burner does not stay lit, the flame sensor or a thermocouple may be the cause. The thermocouple is used for checking if the burner is on or off and, in the worst case, it can shut down the gas supply. This is a problem and can be solved by replacing the thermocouple.
The Control Knobs Are Stuck
Non-responsive control knobs are also common in many gas stoves you find in homes today. This may be as a result of the food debris trapped around the knobs. Clean the knobs in order to have them working again after a period of inactivity. If the condition remains the same, the control valve could be damaged and need replacement.
Delayed Ignition
Delayed ignition, for instance used when the gas accumulates before it is lit, and this results in a small bang when it is lit. This can be due to fouled igniters or blocked burner ports. Try to avoid this situation by cleaning up the igniters and the burner ports. If cleaning doesn’t have any effect, seek the services of a technician.
Pilot Light Won’t Stay On
Sometimes, the igniter may not stay on, and this is an indication that it could be a bad thermocouple. Such is the case with the burner that won’t stay lit; the answer is to replace the thermocouple. Sometimes, this much is true because the flame that the pilot light produces may not be vigorous enough to compel the thermocouple into action.
Conclusion
Today’s gas stoves present certain inconveniences that may make it hard to handle some of them, but most of them are solvable. Poor flame or noisy burners indicate that you require maintenance services for your stove or that a particular part requires replacement. With problems such as a gas leak or a bad thermocouple, it is recommended to contact a professional appliance repair company such as Spins Appliance Repair Atlanta.Learn how to repair your gas stove quickly by dealing with any of these 10 problems that may affect your gas stove.
